Browne, Alan L. and Nancy L. Johnson, "Short Apron Drop
Tests in Support of Focal Project I,"
Automotive Composites
Consortium (ACC) Technical Report TR EM99-03 (1999)
Browne, Alan L. and Nancy L. Johnson, "Short Apron Drop
Tests in Support of Automotive Composites Consortium Focal Project
I," Crashworthiness, Occupant Protection and Biomechanics
in Transportation Systems, ASME Publication AMD-237/BED-45
(1999): 263-285
Browne, Alan L., Nancy L. Johnson, D. Q. Houston, and Larry
Lallik, "Automotive Composites Consortium Generic Tube
Crush Program: Processing and Molding Effects on the Axial Crush
of RTM and SRIM Tubes," in Proceedings of the SAMPE-ACCE-DOE
Advanced Composites Conference (1999):174-195
Deng, B., "Kinematics of Human Cadaver Cervical Spine
During Low Speed Rear-end Impacts", SAE Paper 2000-01-SC13
in Stapp Car Crash Journal 44, Detroit:SAE (2000):171-188.
Khalighi, Bahram and S. Fischer, "Environmental Impacts
of Alternative Refrigerants," ASHREA Journal (2000):50-51
Khalighi, Bahram, Songwie Zhang, Constantinos Koromilas, S.R.
Balkanyi, G. Iaccarino, and P. Moin, "Unsteady Wake Flow
behind a Bluff Body with a Drag Reduction Device," SAE
Paper 2000-01-1042 in Vehicle Aerodynamics Design and technology,
SP-1600 (2001)
Deng, Bing, "Kinematics Of Human Cadaver Cervical Spine
During Low Speed Rear-End Impacts," SAE Paper 2000-01-SC13
in Stapp Car Crash Journal, 44 (2000):171-188
Deng, Bing, "Testing Shear Hypothesis of Whiplash Injury
Using Experimental and Analytical Approach," in Frontiers
in Whiplash Trauma: Clinical and Biomechanical, Yoganandan,
N and Pintar, F.A. (eds.) The Netherlands: IOS Press (2000):491-509
Kang, J. and Jenne-Tai Wang, (1999), "H-ISP - A Hybrid
Inflator Simulation Program," SAE paper no. 1999-01-1069
(1999).
Johnson, Nancy, Alan Browne, Dan Q. Houston, Larry Lalik, "ACC
Generic Tube Crush Program: Comparison of Axial Crush of RTM
and SRIM Tubes," Proceedings of the American Society
for Composites 14th Technical Conference (1999):641-650
Green, P., Y. G. Lee, C. S. Yu, P. B. Butler, D. L. Chen, J.
T. Wang, and J. Kang 1999, "Experimental Analysis of an
Aspirating Airbag Unit," SAE Paper 1999-01-0436 in Safety
Test Methodology, SAE Publication No. SP-1434 (1999)
Fenyes, Peter A., "Multidisciplinary Design and Optimization
of Automotive Structures: A Parametric Approach", in Proceedings
- AIAA / USAF / NASA / ISSMO Symposium on Multidisciplinary
Analysis and Optimization, 8th, AIAA Paper 2000-4706 (2000)
Liter, S., C. Park, M. Kaviany, Jenne-Tai Wang and J. Kang,
(1999), "An Experimental-Based Model of Fabric Heat Transfer
and Its Inclusion in Air Bag Deployment Simulations," SAE
paper 1999-01-0437 in Safety Test Methodology, SAE Publication
No. SP-1434 (1999):71-80
Sung, Shung H. and Donald J. Nefske, "Assessment of a Vehicle
Concept Finite-Element Model for Predicting Structural Vibration,"
SAE Paper 2001-01-1402, (2001)
Sung, Shung H., Donald J. Nefske, Hung Le-The, & Frank Bonarens,
"Development and Experimental Evaluation of a Vehicle Structural-Acoustic
Trimmed-Body Model," Proceedings of the 1999 Noise and
Vibration Conference, SAE Publication P-342:2 (1999):1135-1140
Mourelatos, Zissimos P., "An Efficient Crankshaft Dynamic
Analysis Using Substructuring with Ritz Vectors," Journal
of Sound and Vibration, 238:3 (2000):495-527
Mourelatos, Zissimos P., "An Efficient Journal Bearing
Lubrication Analysis for Engine Crankshafts," Tribology
Transactions, 44:3 (2001).
