Anagonye, Aloysius U., and J. T. Wang, "A Semi-Empirical
Method for Estimating the Effective Leak and Vent Areas of an
Airbag",
Crashworthiness, Occupant Protection and Biomechanics
in Transportation Systems, AMD-.237/BED- 45, (1999): 195.
Barone, M. R., and D. A. Caulk, "Analysis of Liquid Metal
Flow in Die Casting," International Journal of Engineering
Science 38 (2000): 1279.
Beaujon, George J., Samuel P. Marin and Gary C. McDonald, "Balancing
and Optimizing a Portfolio of R&D Projects", Naval
Research Logistics 48 (2001):18.
Blumenfeld, Dennis E., Carlos F. Daganzo, Michael C. Frick,
and David J. A. Gonsalvez, "Impact of Manufacturing Response
Time on Retailer Inventory." International Journal
of Operations and Production Management, 19-8 (1999):797.
Blumenfeld, Dennis E., Operations Research Calculations Handbook,
Boca Raton: CRC Press (2001)
Bordley, Robert F., Mark A. Beltramo, and Dennis E. Blumenfeld,
"Consolidating Distribution Centers Can Reduce Lost Sales,"
International Journal of Production Economics, 58:1 (1999):57.
Chen, Kuo-Kuang, "Finite Element Simulation of Expansion
of Tubes in Hydroforming," in Sheet Metal Forming for
the New Millennium, International Deep Drawing Research
Group, (2000):61.
Chen, Kuo-Kuang, "WRAPFORM-II, A New Binder Forming Simulation
Method". SAE Paper 2000-01-1106, in Sheet Metal Forming,
SAE SP-1536, (2000):113.
Chen, Kuo-Kuang, "The Bulge of Tubes and a Failure Criterion
for Tube Hydroforming", SAE Paper 2001-01-1132.
Chen, Kuo-Kuang, "Deformation, Strain and Stress in Expansion
of Tubes in Hydroforming," SAE Paper 2000-01-0769, in Sheet
Metal Forming, SAE SP-1536 (2000): 33.
Chopra, Sunil, and Jonathan H. Owen, "A Note on Formulations
for the A-partition Problem on Hypergraphs", Discrete
Applied Mathematics 90 (1999):115.
Feit, Eleanor and David S. Wu , "Transfer Line Design with
Uncertain Machine Performance Information." IEEE Transactions
on Robotics and Automation, 16:5 (2000).
Field, David A., "Automatic generation of transitional
meshes", International Journal for Numerical Methods
in Engineering 50 (2001): 1861.
Field, David A., "Qualitative measures for initial meshes",
International Journal for Numerical Methods in Engineering
46 (1999).
Garcia, Alfredo, Daniel Reaume and Robert L. Smith, "Fictitious
play for finding system optimal routings in dynamic traffic
networks", Transportation Research Part B: Methodological,
34-2 (2000):147-156.
Gibbons, Diane I. and Gary C. McDonald, "Constrained Regression
Estimates of Technology Effects on Fuel Economy", Journal
of Quality Technology, 31, (1999): 235-245.
Inman, Robert R., "Are You Implementing a Pull System by
Putting the Cart before the Horse?", Production and
Inventory Management Journal, 40:2 (1999): 67.
Inman, Robert R., "Empirical Evaluation of Exponential
and Independence Assumptions in Queuing Models of Manufacturing
Systems," Production and Operations Management 8:4 (2000):
409.
Joshi, Shirish, Hanif Sherali, and Jeffrey D. Tew, "An
Enhanced Response Surface Methodology (RSM) Algorithm Using
Gradient Deflection and Second-Order Search Strategies",
Computers in Operations Research, 25:7-8 (1999): 531.
Lawless, J. F., R. J. MacKay, J. A. Robinson, "Analysis
of Variation Transmission in Manufacturing Processes---Part
I," Journal of Quality Technology, 31:2 (1999):
131-142.
McDonald, Gary C., "Shaping Statistics for Success in the
21st Century: The Needs of Industry", The American Statistician
53 (1999): 203.
McDonald, Gary C., "Commentary on 'On the Information Economics
Approach to the Generalized Game Show Problem'", The
American Statistician 53 (2000): 393.
Owen, Jonathan H. and Sanjay Mehrotra, "A Disjunctive Cutting
Plane Procedure for General Mixed-Integer Linear Programs,"
Mathematical Programming, 89:3 (2001): 437.
Reaume, Daniel, H. Edwin Romeijn, and Robert L. Smith, "Implementing
pure adaptive search for global optimization using Markov chain
sampling", Journal of Global Optimization 20:1 (2001):
33.
Sastry, P.S., S. Shah, S. Singh, and K.P Unnikrishnan, "Role
of feedback in mammalian vision: a new hypothesis and a computational
model", Vision Research 39 (1999):131.
Sommese, Andrew J., Jan Verschelde, Charles W. Wampler, "Numerical
Decompositon of the Solution Sets of Polynomial Systems into
Irreducible Components", SIAM Journal of Numerical Analysis
38:6 (2001):2022.
Stoughton, Thomas B., "A General Forming Limit Criterion
For Sheet Metal Forming", International Journal of Mechanical
Sciences 42:1 (1999): 1-27.
Wampler, Charles W., "Solving the Kinematics of Planar
Mechanisms", ASME Journal of Mechanical Design, 121-3,
(1999).
William H. Frey, D. A. Field, "Designing Bézier
Conic Segments With Monotone Curvature", Computer Aided
Geometric Design 17:6 (2000): 457.
