EMF Corp.
15110 NE 95th Street Redmond, WA 98052-2591 (425)-883-0045
Sept 1996 to Feb 1998
Position: Quality Control Technician
 Responsibilities:
   Receiving Inspection of parts to ensure compliance to drawings or source specifications:
     Write Discrepancy Notices on all non-conforming materials.
     Move non-conforming materials into MRB.
     Write Corrective Actions and follow them up.
   Final Inspection of completed units for form, fit, function and finish.
   Maintain files of drawings and inspection records for all parts requiring inspection.
   Write test procedures for new products.
 Additional duties:
    Assist in Receiving:
      Count incoming lots & verify quantity against packing slip; verify PO, & due date.
      Enter data into MIS and print PO Receiver.
      Route parts and paperwork to proper places.
 Assist in configuring PCs:
     Add necessary aditional parts
     Check configuration to ensure setup per requirements.

Assorted Temporary Agencies
Bellevue, WA: 1995 to 1996
Various Assignments

Spectrum Controls, Inc.
2700 Richards Road Suite 200
Bellevue, WA 98005 (425)-746-9481
1990 to 1995
Starting Position: Production Stockroom Control
 Responsibilities included:
   Receiving
   ESD-safe storage, routing & management of electronic components
   Kitting procedures & activities.
Last Position: Manufacturing Support Technician
 Resposibilities included:
   First Test, First Calibration, Burn-In, Final Test, & Calibration of:
     I/O Products
     Operator Interface Products
   Fabrication of Engineering & Pre-Production prototypes
   Proof reading user manuals
   Checking schematics
   Generating & Routing:
      Engineering Change Notices
      Manufacturing Change Requests
   Programming PROMS, EPROMS & EEPROMS
   Product Rework:
      Surface Mount
      Through-Hole
      Wire & Cable assemblies
   Assistance in
     Packaging
     Shipping and Receiving
     Stocking & Kitting
   Certified Through-Hole Solder & SMT Soldering, Rework & Repair at Applied Technology and Training Center,July,1994
   Member: APICS,  & 1995 Spectrum Safety Committee

Prototron, Inc.
October 1989 - May 1990
Position: Rover
 Responsibilities Included:
   Drilling, imaging, etching, & plating printed circuit boards

Entra Corp. NW, Redmond, WA:
May 1989 -October 1989
Position: Shipping, Receiving, & Inventory Control
Additional duties:
  relief pick & place operator
  assembly & touch-up
  operator of Electrovert flowsolder machine

Avita, Redmond, WA: October 1988 to February 1989
Position: Long Term Temporary assignment in Inventory Control
Mission:
  re-organize an inventory in excess of $3 million
  process incoming freight
  enter/delete parts locations in MIS
  pull kits for production runs
    exercise cycles
    treadmills
    rowing machines
    stair master machines
  transfer products to Finished Goods

M2EC, Hood River, Ore.: July, 1986 to February 1987
Starting Position: Operations/Production Manager
  Responsibilities Included:
    3 Production Line Leaders & their crews
    4 Test Tecnicians
    one Inventory Control Clerk
Last Position: Production Engineer
  Responsibilities Included:
    Building Engineering & Pre-Production prototypes
    Training Manufacturing crews in assembly procedures for new products
Additional duties:
    Taught  Basic Electronics & Soldering Techniques class during off duty hours

Advanced Communications Technology, Goldendale, WA: May, 1986 to July, 1986
Position: Manager, Inventory Control & Shipping/Receiving
 
 

Back to Resume

Richard Raymond Frye
ricfrye@gorge.net
206 E. Darland
Goldendale, WA 98620
(509) 773-8037